Home  ›  Can I Crackle With the Same Color Paint

Can I Crackle With the Same Color Paint

Written By Thursday, November 18, 2021 Add Comment Edit

Download Article

Download Article

Crackle painting is a technique used to give painted surfaces a worn and aged look. By applying a layer of glue or crackle medium between 2 layers of latex or acrylic paint, you can give almost any surface a faux finish. To get the best possible results, sand and prime your item before painting it. Enhance the distressed look with sandpaper and aging dust and protect the finish with a sealant.

  1. 1

    Choose a decorative item or piece of furniture to crackle paint. Crackle painting works on many different surfaces and materials, such as ceramic and canvas. However, it typically looks most realistic on wooden pieces that naturally weather over time. Consider crackle painting an old rocking chair, a decorative crate, or a piece of wall art.[1]

  2. 2

    Sand wooden items with 150-grit sandpaper. If you choose to paint a wooden object, get sandpaper that is 150-grit or finer from a hardware or home improvement store. Rub the sandpaper against the item's surface to make it smoother for painting.[2]

    Advertisement

  3. 3

    Wipe the item down with a damp cloth. Before painting, you'll want to make sure your object is clean and free of any dirt. This is especially important for wooden pieces, since you'll also need to get rid of any lingering sanding dust. Run warm water over a clean cloth for a few seconds and wring out the water. Wipe the entire surface of your item clean.[3]

  4. 4

    Apply primer to the item. Wait until the item is completely dry to the touch and then get out some paint primer and a paintbrush. Brush one coat of primer onto the item's surface and allow it to dry fully.[4] This should take somewhere between 1 and 3 hours.[5]

    • Any generic paint primer should work fine, but consider getting a wood primer if your object is wooden so that any cracks in the wood are properly filled in.

    Advertisement

  1. 1

    Choose and protect your workspace. Find a location to paint where there's good ventilation, such as outside or in an open garage. Before getting the paint out, put down sheets of newspaper all over your work surface to keep it and anything else in the area from becoming damaged.

  2. 2

    Apply a semi-gloss acrylic base coat and let it dry overnight. After following the primer's drying directions, choose an acrylic or latex paint to apply as a base coat. This can be any color you want, but it's best to get a paint that's semi-gloss or satin. Brush on the paint in the direction of the grain until the entire item is painted. Set the item aside to dry until at least the next day.[6]

    • This will be different than the paint you use for your top coat. Your top coat should have a flat or matte finish, which appears more saturated than semi-gloss or satin.[7]
    • Additionally, the top and base coats should be contrasting colors, such as eggplant and aquamarine.

  3. 3

    Brush crackle medium or school glue onto the object's surface. Go to a craft store and either purchase a conventional crackle medium or white school glue, such as Elmer's. Use a paintbrush to coat the item you're painting in either the crackle medium or the glue.[8]

    • Crackle medium is more expensive than school glue, but both options typically provide good end results.

  4. 4

    Apply thick layers to get big cracks and thin layers to get small ones. If you're wanting to create large cracks, put big globs of glue or crackle medium onto your paintbrush before applying it to your object's surface. Dip your paintbrush into the glue or crackle medium conservatively before applying it to your object's surface if you want hairline cracks.[9]

  5. 5

    Let crackle medium completely dry, but don't allow glue to dry. If you're using a crackle medium, give it 1-4 hours to dry. Otherwise, move onto painting your top coat immediately. For the crackling to work correctly, the glue must be tacky when the top coat is applied.[10]

  6. 6

    Choose a flat latex or acrylic paint for the top coat. Pick a color that contrasts well with your base coat color to get the best visual effects. For example, if your base coat is bright yellow, you might consider choosing navy blue as a top coat. Allow the paint to dry completely so that the cracks stay intact.[11]

  7. 7

    Apply a top coat of flat latex or acrylic paint. Brush one coat only of flat latex or acrylic paint over the crackle medium or glue. Brush your top coat on lightly to get thin cracks and brush on a heavy coat to get large cracks.[12]

    • Use a spouncer brush to sponge-paint the top coat if you want spider web-like cracks.[13]

  8. 8

    Give the paint at least 2 hours to dry. If you aren't sure if it's dry, lightly touch an inconspicuous part of the object with your fingertip. If it feels dry to the touch, and not tacky, then the paint is dry.

    Advertisement

  1. 1

    Sand the edges of wooden items to make the base coat more visible. After the top coat is completely dry to the touch, sand the item again with sandpaper. If you want to see a lot more of the base coat, sand the entire item. If you just want to add a little bit more to the distressed look, just sand the item's edges and curves.[14]

  2. 2

    Create depth and texture with aging dust. If your item is still looking too "new," you can use a paintbrush to brush on some aging dust to give it the illusion of age. Focus on applying the dust in cracks and crevices in order to see more depth and texture.

    • You can purchase aging dust at craft stores and online.

  3. 3

    Seal the finish with a clear coat of sealant. Once you've gotten your item the way you want it, lock in its finish by brushing on a clear coat of sealant. This is an especially good idea if your item is a frequently used piece of furniture that you want to protect.[15]

    • Follow the sealant drying instructions before using the item.
    • If your item is something that will be touched less often, such as a piece of wall art, consider going without the sealant. This will play up the distressed look.

    Advertisement

Add New Question

  • Question

    Can I use a satin paint for a top coat on top of glue?

    Community Answer

    Yes, and it might even crack more effectively. If you're unsure, you could try the technique on a scrap piece of wood.

  • Question

    How can I determine the best color combinations for the bottom and top coats?

    Community Answer

    Anything with high contrast will show up, either light to dark, dark to light, or colors far enough apart on the color wheel. Note that colors DON'T have to be opposite on the color wheel (complimentary), just different enough. Even yellow and orange can contrast enough if the values (light or dark) are different. Try a google image search of crackled pieces for inspiration.

  • Question

    Can I use PVA glue as a crackling glue?

    Community Answer

    Yes. Crackle medium gives a more subtle crackle finish. Make sure not to let the PVA or Elmer's glue dry completely. Otherwise, you'll need to apply another coat.

  • Question

    What type of sealant should I use?

    Community Answer

    "Button polish" from your hardware store is cheap, quick, and easy to apply with a brush. It's a milky tea color, but it dries clear. If you're willing to look into more expensive options, French polish is also liquid and dries clear, and it leaves a shiny finish. If you want a matte finish, use a matte acrylic varnish or polyurethane varnish. (The latter will take a couple of hours to dry but is strong and durable.)

  • Question

    Can I change the bottom color after I crackle paint my tabletop?

    Community Answer

    You could try using thin paint in the cracks to tint the color showing through. You'd have to have a steady hand and be very patient, as that would take a long time for a large surface like a table. Or, you could remove all of the paint and start over from the beginning. That option would be labor intensive, but would probably give the better result.

  • Question

    Can crackle paint be put on as a second layer?

    Community Answer

    Yes, of course.

  • Question

    Method 2 does not say anything about using glue. Do you use glue?

    Community Answer

    Crackle is available at most craft stores. Simply paint on the medium, let it thoroughly dry, then paint over it. You will see it start to crackle as the paint dries.

  • Question

    What do I do it my glue dried?

    Community Answer

    Try applying a thin coat of glue to 're-wet' the first coat. Even if it has dried, it will still crackle as the 2nd paint layer 're-wets' the glue. However, it will not be as dramatic an effect. Also, if you wait until the glue is tacky (as opposed to immediately painting as mentioned in the wiki) it is much easier to apply the paint.

  • Question

    Using the spray method, how does it crackle if you don't apply the crackle paint in between the colors? Unless I missed something.

    Community Answer

    The second method doesn't use crackle. It uses the wet paint and heat gun to crack the paint without an extra substrate. You apply one layer of the base color and let it dry, then a second coat of the same color and WHILE IT'S STILL WET, a third layer of the second color on top of it. With how thick the wet paint is between the two layers, it will crack if it dries too quickly.

  • Question

    Can I use oil based spray paint on the top coat?

    Community Answer

    No. Use only acrylic paint.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

  • For larger projects, you may wish to work in sections so that the glue does not dry before you can apply the top coat.

Thanks for submitting a tip for review!

Advertisement

Things You'll Need

  • 150-grit sandpaper
  • Damp cloth
  • Primer
  • Paintbrushes
  • Latex or acrylic paint
  • Crackle medium or school glue
  • Spouncer brush (optional)
  • Aging dust
  • Sealant

About This Article

Article SummaryX

If you want to decorate an item with crackle paint, sand down and prime the item, then let the primer dry. Once the primer is no longer tacky to the touch, paint the entire object with a semi-gloss acrylic base coat. This is the color that will show under your crackle. Allow the paint to dry for at least a day, then brush crackle medium over the paint. Let the crackle medium dry completely, then use a flat latex or acrylic paint for the top coat. To learn how to distress the finish to enhance the crackle effect, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 374,199 times.

Did this article help you?

Can I Crackle With the Same Color Paint

Source: https://www.wikihow.com/Crackle-Paint

0 Response to "Can I Crackle With the Same Color Paint"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel